Mellerware Hot Beverage Maker 223457 User Manual

E X E C U T I V E  
O v a t i o n B r u s h e d S t a i n l e s s S t e e l Ke t t l e  
complies with  
INTERNATIONAL  
M o d e l :  
22345(7)  
IEC60335  
2200W  
SAFETY SPECIFICATIONS  
PLEASE READ ALL INSTRUCTIONS BEFORE USE  
2 y e a r g u a r a n t e e  
 
MW_EX222345__Ovattion_IM.indd  
1
3/28/2008 11:19:18 AM  
INSTRUCTIONS FOR USE:  
Description  
1. Lid  
2. Handle  
3. On/Off Switch  
4. Base  
5. Power Indicator  
6. Water Level Window  
7. S/Steel Body  
8. Spout  
2
6
1
7
8
3
5
4
HOW TO OPERATE YOUR KETTLE  
It is important that you read these instructions before  
using your kettle for the first time.  
1.  
Open the lid of the kettle, fill with tap water to the  
desired level. (min. capacity is 0.5L and max.  
capacity is 1.7L). In hard water areas, using  
purified or filtered water is recommended to reduce  
the amount of scale build up in the kettle.  
Close the lid by pressing it down until it clicks into  
place. Place the kettle on the base and plug into  
the mains.  
To switch on the kettle, press the On/Off switch  
down (position 1). The power indicator light will  
now be on. When the water has boiled the kettle  
will automatically switch off. You can stop the  
kettle at any time by pressing the On/Off switch up  
(position 0).  
Descaling  
Always ensure that the kettle is disconnected from the  
2.  
3.  
mains before descaling. Scaling or furring is a common  
problem in hard water areas. It is recommended that  
a propriety descaler is used whenever scale deposits  
build up. The instructions supplied with the descaler  
must always be followed. Scale build up may result in the  
kettle switching off before boiling. Using a water purifier  
will help to reduce scale build-up.  
Ensure that you descale your filter at regular intervals to  
avoid impairing the pouring performance of your kettle.  
4.  
Pour slowly and carefully. If you wish to re-boil,  
please allow a few minutes for the kettle to cool  
down.  
Cleaning and Maintenance  
A clean appliance will last longer. Please observe the  
following instructions to get the best use of your  
kettle.  
Warning: If the kettle has just boiled it will be full of  
steam that will escape if the lid is opened.  
Always disconnect the plug from the mains before  
cleaning the kettle and base. Wipe the plastic  
parts and base with a moist cloth. Never use an  
aggressive scourer, steel wool of strong chemical  
cleaners.  
IMPORTANT: Do not open the lid when steam is  
coming out of the spout.  
Before pouring or filling always remember to disconnect  
from electricity.  
Descale the kettle regularly. This will depend on the  
hardness of the water and the frequency of use.  
Scale build up will significantly reduce the heating  
efficiency of the kettle.  
Note:  
If the kettle is switched on when empty or with  
insufficient water, then the kettle will switch off  
automatically to protect against dry boiling. Wait  
until the heating element cools down, refill with tap  
water and use as normal. This protection function  
is not designed for regular use, as it will shorten the  
life of the kettle.  
If the kettle is overfilled, boiling water may be  
ejected.  
The kettle is only to be used with the stand  
provided.  
The appliance must not be immersed during  
cleaning.  
If the supply cord is damaged, the manufacturer or  
its service agent or a similarly qualified person must  
replace it in order to avoid a hazard.  
Use of a proprietary descaler for kettles is  
recommended. Follow the instructions provided  
carefully.  
For stainless steel kettles you should use a soft  
absorbent cloth to remove the condensation from  
the body to prevent minerals in the steam/water  
from oxidizing and giving the appearance of rust  
marks on the kettle. A metal polish should be  
used to protect and maintain your kettle in a good  
condition.  
Disposal and the Environment  
If your electrical appliance requires replacement or  
is of no further use, please think of protecting the  
environment. Contact you local authority for advice as  
many have facilities for environmentally safe disposal.  
 
MW_EX222345__Ovattion_IM.indd  
3
3/28/2008 11:19:19 AM  
Trouble Shooting Guide  
Problem  
Reason  
Action  
Pre-caution  
Kettle is leaking water  
May be condensation  
This is normal if boiled a num-  
ber of times in succession  
Pour out water to MAX level.  
This kettle is for household  
use only.  
Kettle is over filled  
If overfilled water can eject  
from the kettle resulting in a  
hazard  
Switch is sticking  
Ensure switch button is clean.  
Switch on household socket  
Keep appliance away from  
cooking splatter.  
Kettle does not work  
Household socket is off.  
Ensure water covers the ele-  
ment before operating.  
Appliance must be of similar  
wattage to prevent overloading.  
Your life of the kettle will be  
reduced if not seated on base  
correctly.  
Household socket is not  
working  
Check the socket with another  
appliance  
Kettle is not seated on base  
correctly.  
Seat kettle on base correctly  
Kettle trips mains power  
supply  
Overloaded circuit.  
Unplug all appliances attached  
to the same circuit.  
Note that their can be up to 5  
household plug sockets on 1  
circuit.  
Kettle takes too long to boil  
Kettle works intermittently  
Kettle is rusting on outside  
Element has lime scale  
deposits.  
Descale element using a  
proprietary descaler or citric  
acid solution. If not successful  
then a new element may be  
required.  
Kettles with scale will have a  
reduced lifespan. Clean the  
scale regularly.  
Element has lime scale  
deposits.  
Descale element using a  
proprietary descaler or citric  
acid solution. If not successful  
then a new element may be  
required.  
Kettles with scale will have a  
reduced lifespan. Clean the  
scale regularly.  
Steam deposit has oxidised and  
turned into an orange colour.  
Wipe your kettle after each use  
to keep dry. Polish stainless  
steel occasionally.  
Keeping any appliance clean  
at all time will extend the life of  
the product.  
Element is rusting. Rust spots  
on element.  
Water deposits on the element.  
Some areas have water that  
will result in orange or brown  
stains.  
Some stains are stubborn and  
a descaler may not be effective.  
This should not affect function.  
Use distilled water.  
Kettle does not switch off  
automatically  
Lid not positioned correctly  
or is off.  
Place lid on the kettle securely.  
Ejecting steam from the spout  
or lid can be a hazard  
27 Nourse  
Avenue Epping  
2
Cape Town  
P.O. Box 975 Eppindust 7475 South Africa  
Tel: +27 21 534 8114 Fax: +27 21 534 8086  
Service Centre Share Call: 086 111 5006  
w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a  
 
MW_EX222345__Ovattion_IM.indd  
4
3/28/2008 11:19:19 AM  

La Crosse Technology Clock WS 8157 User Manual
La Pavoni Coffeemaker P03 User Manual
Lindy Network Card SATA 150 User Manual
Magnadyne Car Video System MV 1002 User Manual
Makita Portable Generator G12010R User Manual
Manfrotto Carrying Case MBAG100P User Manual
Martin Audio Speaker C101C User Manual
Maverick Ventures Thermometer ET 41 User Manual
MegaTech Motorized Toy Car MTC8209 User Manual
Midland Radio Weather Radio HH54 User Manual