Legacy Car Audio CD Player LCD75DFX User Manual

SPECIFICATION  
GENERAL  
LEGACY  
Supply Voltage  
Current Consumption  
Power Output  
Unit Dimensions  
DC 13.8V. Negative Ground  
Max.7A  
40W X 4.  
LCD75DFX  
178[W] X 50[H] X 165[D] mm.  
FM SECTION  
Frequency range  
87.5MHz -107.9MHz (USA)  
87.5MHz -108.0MHz (EUR)  
3uV.  
Effective sensitivity  
I.F Frequency  
INSTRUCTION MANUAL  
10.7MHz.  
AM SECTION  
Frequency range  
530KHz - 1710KHz (USA)  
522KHz - 1620KHz (EUR)  
450KHz  
I.F Frequency  
RCA LINE OUT (OPTION)  
Output  
CD Max. 1200mv  
CD PLAYER  
System  
Suitable CDs  
Signal format  
Compact Disc Audio System.  
CD/CD-R/CD-RW Disc  
Sampling frequency 44.1KHz.  
No. of quantization bits 1bit.  
20-100Hz <5dB  
Frequency characteristics  
10-20KHz <5dB.  
50dB [1KHz]  
2 STEREO channels.  
S/N Ratio to CD  
Number of channels  
ANTI-THEFT FLIP DOWN DETACHABLE SYSTEM  
AUTO-LOADING COMPACT DISC PLAYER  
AM/FM-STEREO DIGITAL PLL TUNING RADIO  
WITH INFRARED REMOTE CONTROLLER  
11  
 
BASIC OPERATING OF FUNCTIONAL KEYS  
PRECAUTION OF DISC PLAY:  
Cleaning the CD:  
Before playing a CD, wipe it off with a clean, dust-free cleaning cloth.  
Wipe the disc in the direction of the arrow.  
Always insert the CD with the label side facing upwards.  
If the CD is inserted with the printed side facing downwards, the device  
may be damaged.  
1. OPEN BUTTON  
Press the OPEN button to fold down the front control panel.  
Then a CD can be inserted into the CD slot or ejected by pressing  
the EJECT button.  
Note: If there is already a CD in the CD slot, do not try to insert a  
second CD. For this may damage the device.  
Always hold CDs by the edge. In order to keep the CD clean do not touch  
the surface. Pull out the CD as the direction of follows.  
2. RELEASE BUTTON  
To remove the front control panel from the main body, poke at the  
REL button downward to eject the front control panel.  
3. SEL BUTTON (Select) AND +/- BUTTONS  
a) Press the SEL button briefly to select the mode of sound mode item by  
item, such as VOLUME, BASS, TREBLE, BALANCE and FADER.  
Now the settings of them can be adjusted by using the + and - button.  
(Note: If equalizer settings such as POP and ROCK have been selected  
under DSP, it is impossible to change to BASS and TREBLE.)  
b) Press the SEL button and hold for more than 1 second to access the  
menu mode. Now press the SEL button briefly to select the menu mode  
as follows: DSP (OFF / POP M / ROCK M / CLASS M / FLAT M), BEEP  
ON/OFF, SEEK 1/2, VOL LAST/ADJ.  
Do not attach any sticker or adhesive tape on the CD.  
Do not expose the CD to direct sunlight or sources of heat such as  
heating pipes.  
DSP  
In DSP mode you can select the equalizer settings POP M, ROCK M,  
CLASS M and FLAT M, and DSP OFF by using the + and - button.  
BEEP ON/OFF  
Do not leave CDs in a car if it parked in direct sunlight as that will lead to  
a considerable rise in the temperature inside the car.  
You can select two types of confirmation beep by using the +/ - button.  
BEEP ON: The confirmation beep can be heard whenever a button is  
pressed.  
Note: Do not use any solvents such as petrol or thinning agents.  
Commercially available cleaning substances or antistatic spray will damage  
the device.  
BEEP OFF: The confirmation beep is switch off.  
9
2
 
SEEK 1/ 2 (only available during radio operation)  
Seek function with the or button during radio operation.  
You can select SEEK 1/ SEEK 2 by using the +/- button.  
SEEK 1: Keep the  
or  
stop at the next station that is detected.  
buttons pressed down and the radio will  
SEEK 2: As long as the  
or  
function will continue in the frequency band.  
buttons are pressed down the search  
VOL LAST/VOL ADJ  
You can select VOL LAST or VOL ADJ mode by using the +/- button.  
VOL LAST: The radio switches on at the actual volume it had when  
it was last switched off.  
VOL ADJ: Using the + and - buttons you can pre-select a constant  
switch-on volume.  
4. POWER ON/OFF  
Turn the device on by using any button except the OPEN and the REL  
button on the front control panel; Press PWR button and hold for  
approximate two seconds to turn power off.  
5.6. LCD (Liquid Crystal Display)  
7. TUNE, SEEK, TRACK, SKIP UP / DOWN BUTTONS  
a) During RADIO mode:  
press the  
Press the  
or  
or  
button briefly to tune a frequency manually.  
button and hold for more than one second to start  
the automatic search for a radio station with a strong signal level.  
(See also the function SEEK 1/SEEK 2.)  
b) During CD mode:  
press the button briefly to play next track. Press the button  
briefly to play the current track from the beginning of the current track.  
Press the  
Press the  
button twice continuously to play the previous track.  
or button hold to skip forward or backward.  
8. BAND BUTTON  
Press the BND button briefly to select the radio broadcasting band  
you would hear.  
9. MODE BUTTON  
Press the MODE button to select the CD playback or radio mode.  
10-15. PRESET STATION MEMORY AND TOP, INT, RPT, RDM BUTTONS  
a) During radio mode:  
Press the six buttons briefly directly selects a preset radio station.  
If the six buttons are pressed for more than 2 seconds, the station  
currently being listened to is memorized into the selected preset  
button.  
3
8
 
b) During CD mode:  
WIRING DIAGRAM  
Press the TOP button briefly to interrupt the playback of the CD.  
Press again to resume normal playback of the CD.  
Press the TOP button and hold for approximately 2 seconds to play  
the first track of the current disc.  
ANTENNA PLUG  
Press the INT button to play the first 10 seconds part of each track.  
Press again to stop scan, while the currently selected track will be  
played.  
FUSE 7A  
YELLOW  
CONSTANT B+  
BLACK(GND)  
Press the RPT button to play the current track repeatedly. Press  
again to cancel this function.  
Press the RDM button to play all tracks on disc in random. Press  
again to cancel this function.  
RCA LINE OUT  
GREY  
RED R  
FUSE 0.5A  
WHITE L  
ACC RED (B+)  
FRONT  
BLUE AUTO ANT  
+
FRONT  
+
WHITE  
16. CLOCK BUTTON  
-
WHITE/BLACK  
GREY/BLACK  
VIOLET  
-
LEFT  
SP  
RIGHT  
SP  
Press the CLK button briefly to display time on the display, then press  
the CLK button and hold until the real time flashes on the display.  
And then press the + or - button to adjust HOUR or MINUTE.  
+
+
GREEN  
REAR  
REAR  
GREEN/BLACK  
VIOLET/BLACK  
-
-
Note:  
17. SCAN BUTTON  
Make sure use a speaker with 4 ohm load impedance to reduce  
the distortion during high volume level.  
Press the SCN button to scan the radio frequency. If a valid signal has  
detected, the current frequency will be hold and blinked for 5 seconds,  
then press SCN again to stop scan and remain the current frequency;  
otherwise, the radio will go on to scan the other radio frequency fiver  
seconds later.  
For connecting speaker harness better and prevent to  
short circuit, please have connecting refer to the process  
as follow.  
18. ST/MO BUTTON  
During radio mode, press the ST briefly to select stereo or mono sound  
mode.  
19. INFRARED REMOTE CONTROL SENSOR  
7
4
 
The Maintenance of Remote Control  
OPERATION OF REMOTE CONTROL:  
Note:  
REPLACE THE BATTERY OF REMOTE CONTROL:  
Before use this remote control, please make sure  
turn on the device by pressing the power button on  
the front control panel.  
1.Remove the battery holder as the direction indicated by the arrow.  
2.Replace the battery, Set a new battery properly with (+) side up.  
3.Insert the battery holder. Push in the holder to the original position.  
1. Power On/Off. 2. Mute Button  
3. Loudness Button  
Press this button briefly to enhance the bass  
effect while the volume is low. Press again to  
cancel the loudness effect.  
4. Level/MENU UP Button  
5.SEL/MENU Button  
6. Level/MENU Down Button 7. MO/ST Button  
8. A.P Button 9.Band Button 10. Mode Button  
11.Tune/Seek Up And Track Skip Up/FF Button  
12.Tune/Seek Down And Track Skip Down/REW Button  
BATTERY INFORMATION:  
Designated Battery: CR2025 3V  
Battery Life: 6 months with normal use in normal room temperature, and  
the out of date battery must be immediately removed and disposed properly.  
CAUTION:  
Improper use of batteries may cause overheating, explosion or ignition, and  
resulting in jury or fire .  
Battery leakage may cause damage to the unit.  
Do not disassemble or short the batteries.  
Do not throw the batteries into the fire.  
13. SCAN BUTTON  
15. LO/DX Button  
14. Clock Display /Setting Button  
At radio mode, press it to change local reception or distance reception.  
And the LOC will showing on the LCD display when the receiver detect  
some signal of stable local station.  
To avoid the risk of accident, keep the batteries out of reach of children.  
Note: This operation is only effective on FM reception. During AM mode,  
LOC is ineffective.  
16. CD Track TOP/Radio Preset 1  
18. CD Track RPT/Radio Preset 3  
20. Radio Preset 5  
17. CD Track INT/Radio Preset 2  
19. CD Track RDM/Radio Preset 4  
21. Radio Preset 6  
5
6
 

KWC Plumbing Product 28243226000 User Manual
Lego Games 79011 User Manual
LG Electronics Range LRE3091S User Manual
Logitech Computer Keyboard Tab4 101 User Manual
Makita Cordless Saw JRl80DWB User Manual
MartinLogan Speaker Voyage User Manual
M Audio Home Security System DELTA 1010 User Manual
McCulloch Brush Cutter 2500CXL User Manual
Meade Drums te923w m User Manual
Melissa Toaster 243 056 User Manual